诺氟沙星片在中国健康受试者空腹和餐后状态下生物等效性研究#br#

目的：采用随机、开放、两周期、自身交叉、单次给药试验设计比较浙江医药股份有限公司新昌制药厂生产的诺氟沙星片与原研产品BACCIDAL在中国健康人体中的生物利用度，并评价两种制剂的生物等效性。方法：分别在空腹和餐后条件下，健康受试者随机交叉单剂量口服诺氟沙星片受试制剂或参比制剂100 mg，采用液相色谱-质谱串联（LC-MS/MS）法测定受试者服药前后不同时间点血浆内药物浓度，采用WinNonlin 7.0软件计算主要药代动力学参数，并评价两种制剂的生物等效性。结果：空腹试验共有28例受试者入组并完成试验，诺氟沙星受试制剂与参比制剂的Cmax分别为（607.62±125.24）ng/mL和（552.01±134.11）ng/mL；AUC0-t分别为（2 551.66±509.08）ng·mL-1·h和（2 429.98±460.47）ng·mL-1·h；AUC0-∞分别为（2 675.40±523.04）ng·mL-1·h和（2 557.68±485.43）ng·mL-1·h；t1/2分别为（6.07±0.69）h和（6.18±0.92）h；两种制剂的Cmax、AUC0-t和AUC0-∞几何均值比的90%置信区间分别为101.45%～121.94%、98.96%～111.27%、98.82%～110.76%。餐后试验共有28例受试者入组并完成试验，诺氟沙星受试制剂与参比制剂的Cmax分别为：（256.54±58.87）ng/mL和（300.80±94.67）ng/mL；AUC0-t分别为（1 314.74±349.92）ng·mL-1·h和（1 278.60±314.77）ng·mL-1·h；AUC0-∞分别为（1 413.73±361.98）ng·mL-1·h和（1 374.98±321.62）ng·mL-1·h；t1/2分别为（6.66±1.23）h和（6.66±1.34）h；两种制剂的Cmax、AUC0-t和AUC0-∞几何均值比的90%置信区间分别为81.42%～93.56%、99.61%～105.58%、99.80%～105.21%。结论：浙江医药股份有限公司新昌制药厂生产的诺氟沙星片与原研产品BACCIDAL在中国健康受试者空腹和餐后服用的状态下等效且安全性良好，临床上可以替换使用。     

Fabrication of novel silicon carbide-based nanomaterials with unique hydrophobicity and microwave absorption property

Novel SiC-based nanomaterials, namely the nitrogen and aluminum co-doped SiC@SiO₂ core-shell nanowires and nitrogen-doped SiO₂/Al₂O₃ nanoparticles, have been fabricated through a facile thermal treatment process based on the chemical vapor deposition and vapor-liquid reaction. These nanomaterials show remarkable hydrophobicity with a water contact angle (CA) over 140°, which are aroused by the surface zigzag morphology of the nanostructures and the hydrocarbyl groups generated during the preparation process. Moreover the nanocomposites also exhibit relatively prominent microwave absorption (MA) properties in the frequency range of 2.0-18.0 GHz. The minimum reflection loss (RL) value as low as −23.68 dB can be observed at 14.16 GHz when the absorber thickness is 2.6 mm with a loading rate of 16.7 wt%. And the nanocomposites-based absorbent can achieve an effective absorption bandwidth (RL < −10 dB) of 4.48 GHz with the absorbent thickness of 2.5 mm. This enhanced microwave attenuation performance can be attributed to multiple polarizations and perfect impedance matching conditions, as well as multiple internal reflections. These marvelous properties make these N and Al co-doped SiC@SiO₂ core-shell nanowires and N-doped SiO₂/Al₂O₃ nanoparticles display extensive application potential as MA materials in harsh environment.     

采编播系统的异地构建和应用

主要阐述在距离台技术大楼2 km远的海盐一家门频道采、编、播系统的构建。整个系统的搭建,充分考虑了时间、空间、距离等各方面的要求,突出异地构建的特点,融合了电视台的节目录制、安全播出、计算机网络、远程控制等多方面技术。     

A method for rapidly evaluating reliability and predicting remaining useful life using two-dimensional convolutional neural network with signal conversion

Journal of Mechanical Science and Technology - Real-time monitoring and rapid evaluation of bearing operating conditions, especially for the reliability evaluation and remaining useful life (RUL)...     

焊缝表面缺陷激光扫描三维重构测量

为检测工件焊缝表面缺陷，采用点激光位移传感测距法和数据拟合技术进行焊缝表面缺陷检测试验研究. 首先采集缺陷表面轮廓数据点，利用高斯滤波对原始数据降噪处理. 再对处理后的数据点进行Delaunay三角剖分，使散乱点连接并结合其空间坐标重构出缺陷的三维模型. 结果表明，基于点激光位移传感测距技术及焊缝表面缺陷三维重构方法可以准确判断焊缝成形情况.     

Preparation of CaO granules using the granulation method

ABSTRACT

Improving the hydration resistance of CaO particle in manufacturing and application of free CaO-containing materials has practical significance. In this study, CaO granules was made from Ca(OH)₂ particles, which were fabricated by the granulation method. The results showed that the hydration resistance of the CaO granules which was prepared under 1700?r?min^?1 was the best, the CaO granules was sintered well in calcination process, the shell of CaO granules was relatively dense, which improves the hydration resistance of CaO granules, and the rate of hydration weight increment was 0.58% after placed in the air for 20 days under a temperature of 10–14°C and a relative humidity of 57–81%.     

磁絮凝强化技术处理厌氧消化污泥脱水液

为满足后续生物处理单元对固体悬浮物（SS）和铁浓度的进水要求，采用磁絮凝强化技术对厌氧消化污泥脱水液进行预处理。通过正交试验和单因素试验，本文考察了混凝水力条件、聚合氯化铝（PAC）投加量、聚丙烯酰胺（PAM）投加量、磁粉投加量及药剂投加顺序对磁絮凝效果的影响。试验结果表明：磁絮凝强化技术在快搅300r/min（2min）、慢搅100r/min（15min）、静置10min时，依次投加磁粉（40mg/L）、PAC（30mg/L）、PAM（4mg/L）时处理效果最好。在此运行条件下，SS和Fe³⁺去除率分别为97.61%、98.24%、絮凝指数（FI值）取得最大值、zeta电位绝对值最小，絮凝效果最佳。与对照相比，磁絮凝强化技术对SS和Fe³⁺去除率分别可提高3.70%和10.82%，同时絮体最大沉降速度可提高33%。磁絮凝技术处理后的出水不仅可以满足后续生物处理单元对SS和铁浓度的要求，还可以有效提高磁絮凝体的沉降速度，减小沉淀时间，具有较好的实用价值。